MotorConfig |
CAN Address |
Invert |
InvertSensor |
Unit Conversion Factor |
Brake Mode |
Reverse Limt Switch Mode |
Forward Limt Swith Mode |
PWM Channel PWM Channel specifies the channel you want to use for the motor controller. Select a value from PWM 0 to PWM 9 or from PWM MXP 0 to PWM MXP 9. The default is PWM 0. If PWM Channel is Invalid, this VI returns an error. |
Motor Controller Type |
Peak Current (A) |
Continuous Current (A) |
Peak Duration (ms) |
Current Limit Enable |
refnum name |
MotorControlDevRef |
DeviceStatus |
status status is TRUE (X) if an error occurred or FALSE (checkmark) to indicate a warning or that no error occurred. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
code code is the error or warning code. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
source source describes the origin of the error or warning. Right-click the error in control on the front panel and select Explain Error or Explain Warning from the shortcut menu for more information about the error. |
Type |
PWM |
PWM Channel |
DeadBand |
Name |
maxPositivePwm |
minPositivePwm |
centerPwm |
maxNegativePwm |
minNegativePwm |
angularRange |
CAN |
Device Number |
SetOutput VI Ref |
GetOutput VI Ref |
Enable VI Ref |
Disable VI Ref |
Data |
Invert |
DIO PWM |
PWM "Enable" Channel |
DIO Channel |
PWM Rate |
"ArgosLib.lvlib:MotorControllerDevRefGet.vi History"
Current Revision: 5